Setting Goals
One key to any successful model railroad is to start with the end in mind. One should determine as much as possible beforehand the type of railroad one intends to build. Will it be a "Tinplate" toy train layout, a modern scale-inspired "Hi Rail" layout, or something in between? Will it feature mainly loop running or imitate prototype operations? What type of track and power supplies should be used? What is the budget? All of these are important questions to ask before the first lumber is cut and the first screw is turned.
To make the FUN Lines more appropriate for my boys the following goals were set:
- Lower the table from 40" to 24" to be more child-friendly. A lower table means shorter arms can reach trains and accessories anywhere on the board. It also means shorter and less damaging falls for any equipment that might find itself leaving the table involuntarily.
- Simple track plan with lots of action.
- Mostly loop running with only a siding or two.
- Independent track loops with simple wiring and control schemes.
- Room on the table to incorporate a Carrera Go! slot car set and a K'nex roller coaster as well for more visual appeal. Our home is the gathering place for most of the kids in our neighborhood. I wanted a train/car/toy table that could entertain 4 or more little one simultaneously.
- Budget is tight, so recycle as much of existing benchwork as possible.
Construction Begins
The existing benchwork consisted of the "big layout" which utilized two 4' x 8' plywood sheets connected in an "L" shape with an extra 18" x 48" shelf attached to one side and a separate 4' x 4' table. The first step was to detach all sections from one another. The small table had 24" legs so I then cut the legs of the large layout down from their 40" height to match the smaller table. I reattached to original twin 4' x 8' tables in their "L" configuration and added the 4' x 4' section to one end, giving each side of the "L" dimensions of 4' x 12'. Meanwhile, I reinforced the entire perimeter with 2" x 4" x 12' studs because I anticipated the new 24" high table would be a tempting surface upon which to lean, stand or crawl. Also, the old 4' x 8' tables were originally constructed as a "temporary" layout more than 15 years ago and utilized only 1" x 3" and 1" x 4" framing which had begun to sag after years of use.
Next I temporarily set up the Carrera Go! slot car track. At its widest the slot car track is nearly 5' wide so I determined the proper location and reattached the "shelf" section to accommodate the slot cars. Then I removed the slot car track from the table.
Next I temporarily set up the Carrera Go! slot car track. At its widest the slot car track is nearly 5' wide so I determined the proper location and reattached the "shelf" section to accommodate the slot cars. Then I removed the slot car track from the table.
Surface Prep
Now I had a hodge-podge of tables of varying ages and surfaces. One was only a few weeks old while two had seen the construction, destruction and rebuilding of nearly a dozen railroads over a decade and a half and featured remnants of several layers of scenery. To even things out I applied a coat of latex paint over the surface of all tables. With a limited budget I combined the remains of several household painting projects into one gallon. The resulting color is a bit more of a mint green that I desired, but this will all eventually be covered by other scenery.
Laying Track
I began with the slot car set. The Carrera Go! cars are scaled at roughly 1/48, so they work well with O scale trains. I reassembled the track, cleaned and vacuumed it thoroughly, and tested all electrical connections. This quickly gave me a means of occupying two boys while I continued work on the railroad portion of the layout. Also, I measured and located a suitable location for the K'nex roller coaster which also scales out to roughly 1/48 and provides added activity to the layout.
 |
| The inner loop plan of the redesigned FUN Lines. Plan made using Anyrail software. |
The 90 degree crossing requires that I abandon my usual practice of using only Marx turnouts on the layout because, while I have figured a means of modifying Marx turnouts to accommodate Lionel electrical pickups, Marx crossings are totally incompatible with Lionel pickups and Lionel crossings are incompatible with Marx "fat wheel" locomotives. Therefore, I am using Lionel turnouts on the inner loop and my small fleet of incompatible locomotives are relegated to the outside loop only.
On previous layouts I had always utilized O42 curves for both their aesthetic value and the ability to "crank up" the speed of trains with less fear of derailment. However, to add some operating interest to the outer loop I have included a long passing siding so that the operator may easily switch between two trains on the loop. The necessary turnouts for this plan precluded the use of O42 curves in favor of Marx O34 curves on one end of the loop and O27 curves on the opposite end as the loop must detour around the end of the K'nex roller coaster. Still, by using only smaller O27 locomotives and cars most problems associated with tighter curves will be avoided.
Each loop has a separate control panel with a conventional power pack and necessary turnout controllers. The outer loop will use Atlas electrical controls to switch power between the siding and the main line.
As of this time, the inner loop is complete and basically operational, although I have not added the remote turnout controls yet. Track is laid for the outer loop but it is not yet wired.
Eventually, operating accessories such as the classic Lionel cattle car, milk car and operating dump cars will be added. In the mean time, the boys are having fun with the cars and trains, and also with the various Hot Wheels and other vehicles delivering freight from the trains to various points on the layout. So far, the plan for the kids' layout seems to be a success!
- Happy Railroading!
